Time-Pressure-Dispensing

Systems and valves for automatic an manual use

ADACDOS-005/060/240

These manual dispensing systems, with or without electronic control ADACBOX-BB-01, are specially designed for low viscosity products. Different types are available for cyanoacrylates (Teflon tubing), lacquers (with disposable needles), or even UV-glues (with ultraviolet protection). The product is contained in a Teflon bottle. The following capacities are available: 5, 60, 240 cm³. It is possible to meter points with a volume of 0.1 to several mm³ or even stripes (continuous metering).

Downloads: ADACDOS-005/060/240

 

MDH-3-PN / MDH-3-PNJ

Small, pneumatic time-pressure controlled dispensing valve fitted with an integrated manual flow adjusting system. Control of the dispensing cycle motions by a PNP proximity switch (optional). The valve can be used in manual or in automatic mode. It was specially designed for low to high viscosity products and features very short cycle times. The MDH is able to dispense points with volumes between 1 and 1,000 mm³, as well as very fine stripes on long surfaces. The MDH-3-JET offers additionally the possibility to jet low to middle viscosity products at extremely short cycle times. It can be fed directly from a barrel pump, or any kind of tank or cartridge, or even a syringe.

Downloads: MDH-3

 

DDH-1-MB / DDH-3-MB (with Teflon membrane)

Membrane dispensing valve (1 way), delivered with or without electronic control ADACBOX-BB-01. Equipped with a manual flow adjusting system. The opening and closing operation of the dispensing cycle is assured by a specially designed Teflon membrane. The valve was designed for the dispensing of aggressive low to middle viscosity products. Outlet with disposable dispensing needle. Extremely short cycle time. To dispense points of 1 mm³ or even more as well as stripes on long surfaces. It can be fed directly from a barrel, or any kind of tank or cartridge, or even a syringe.

Downloads: DDH-1-MB / DDH-3-MB

 

DDH-3-MPDDH-3-PN

Dispensing valve with integrated manual flow adjusting system. Delivered with or without electronic control ADACBOX-BB-01. The dispensing motions can optionally controlled by a PNP proximity switches. Integrated leakage monitoring of the dispensing valve. The valve was especially designed for low to high viscosity products and achieves very short cycle times. It is suitable for dispensing points with volumes between 1 and more cm³, as well as fine stripes on long surfaces. It can be fed directly from a barrel pump, any kind of tank, cartridge, or even a syringe. Optionally a dispensing pen can be connected by a tube to the dispensing valve.

Downloads: DDH-3

 

Accessories:
Foot pedal, control: ADACBOX-BB01, tanks, feeding tubes, pneumatic tubes, dispensing needles